Schadenfreude Crackle Incense Tray

Burn some incense while you explore the charts at this Vintage Astrology Collabor88.  A crackle finish tray to hold your stick incense while it burns- each stick will burn down for one hour, dropping ash in the tray as it burns down to keep it tidy.  Touch it to start it burning from unlit, to pause it at a particular length, to restart it burning from that length, and to replace the incense with a new stick.  Texture change: 10 colors of cracked ceramic and 7 scents of incense to choose from.  Scale it up and it'll still work, the smoke will adjust to fit (note: it's best to scale it while unlit and THEN light it!  It may not burn correctly the first time otherwise).

PBR and non- take your pick, PBR choices include fallbacks.  PBR incense has a little bit of an edge as it burns a little brighter on the edge!

At Collabor88, November 8 - December 6.

Schadenfreude Curious Jack o' Lanterns

And more pumpkins to be found at Collabor88!  8 faces carved into pumpkins, each separate with the naturals option of 16 pumpkin options, mostly shades of oranges with a couple of speckled squashes, plus 10 shades of stems, and flames in 2 texture styles to light up the insides (a more realistic candle flame, and a fancier option).  The uberpack of all 8 also includes a lot more pumpkin options! in weirdo colors of ghost pumpkins, blue pumpkins, pastels, neons, desaturateds, dark and moodys, and a few pastel ombres; plus 5 colors of flame and light to light up your pumpkins, each in both flame options.  Find a treat bucket there now too- there are 13 to collect at events I'm currently in, in the elephant on the dresser, for group members of a few groups, and a few other places around.  Grab one and check the included notecard for all the locations!

The jack o' lanterns all light up with projector lights of their face, and also include non projector options that don't cast light but still "light" up.  (With the introduction of PBR, projection lights are becoming less optional and more always on- but they can still be too much for your environment and you may not want light cast, just the flame on and off and glow.)  Light is also editable on all- set inside tint (note: PBR and non PBR tint in different places, and that will not be carried over!) and glowing emissive color tint, flame tint, glow amounts, and light amounts (intensity, falloff, etc.) while it's lit, and it will be remembered (note: only some of these options will be remembered if you change a pumpkin with the HUD after setting anything, with the way it overwrites some things, so make your color selection first!  That was always the case before, but there are some other weirdnesses with the way it overwrites things with the way PBR works, more things are attached to the material instead of the object) when you turn it off and on again.

PBR and non PBR texture options, pick your preference with the HUD, fallback textures will change to match PBR choices for those not on PBR viewers.  As most (but not all!  Depends on what the thing is) of the time, PBR Metal and Roughness settings are also editable to some degree- you can make them a bit shinier (or less shiny) if that's your preference- I try to do as much adjustable in SL as I can, so it's as flexible as I can come up with so you don't have to like what I like!

You can also touch and hold for 5 seconds and set the access to only yourself as the owner, members of the active group the pumpkin is rezzed under, or everyone for who can turn them on and off on touch.

At Collabor88 until November 6.

Schadenfreude Skullantern

X shirt: [ ridi-ludi-fool ] KIMONO-sleeve shirt (chiki.vita)
rings: Schadenfreude Geo Ring Set (allegory.malaprop)

credits

Panic of Pumpkin is here again!  A skull shaped lantern to light your way, full of colored flames.  You can carry it in your left or right hand, each with two hold options.  And you can also bring it home and set it down.  PBR optional textures, with fallbacks for those not on PBR viewers, cast light and just glowing versions included.

Plus, as is tradition, every day you can trick or treat at doors around the event!  A door with a bat has a gift for you, each gift is available for one day only (after which you can purchase it) from 8am SLT to 8am SLT, and the next day- new treats!  October 29, starting at 8am SLT, my gift will be given out to trick or treaters who say "trick or treat" in the dialog box to my door, the gift of EyeBats.

Panic of Pumpkin is open October 16 @ 7am SLT to October 31 @ midnight SLT.

Schadenfreude Witch Hat of the Illuminating Path

X hair: Sintiklia - Min-Ji (sintiklia.uwu)
shirt: Pixicat- Milano Blazer (areve)
eyes: {S0NG} Cupid Eyes (funeral.plutonian)
skin: -tres blah- {Pale} Jejune (julliette.westerburg, note: long retired)
head: [AKERUKA Advanced] Head W08 (koaz.koba)

credits

A witch hat at FLF-o-Ween!  Texture change with black, of course, and a few other colors for your witchy needs, with a lantern hanging in the back to light your way, and even more so for creating a light for others to follow (your choice whether you lead them astray!) with metal and light color options.  PBR with fallback options for those not on PBR viewers, and choose whether you want PBR textures or not (as previously stated...sometimes I'm into it.  Sometime I'm super duper not into it...).  A few other things are on 50L sale there as well!

And everyone has gifts for FLF group members as well, another witch hat, this one for display on a head hat stand, is my gift to you.

At FLF-o-Ween, October 11 - November 1!

Schadenfreude Alphabet Pumpkins

Some pumpkins to spell out whatever you desire at this Neon Halloween Collabor88.  46 pumpkins- 26 letters, 10 numbers (so you can carve your house number!), and a handful of extra characters, carved in a stencily custom serif font (will I ever do the rest of the character set for it?  Probably not).  1 LI for each pumpkin at given (which is pretty big for a pumpkin!) size and a bit larger, scale up or down to your desire.  Texture change in two packs- the mini natural pack includes 16 pumpkin options, mostly shades of oranges with a couple of speckled squashes, plus 10 shades of stems, and flames in 2 texture styles to light up the insides (a more realistic candle flame, and a fancier option).  The uberpack of all the options includes a lot more pumpkins! in weirdo colors of ghost pumpkins, blue pumpkins, pastels, neons, desaturateds, dark and moodys, and a few pastel ombres; plus 5 colors of flame and light to light up your pumpkins, each in both flame options.

They all light up with projector lights of their character, and also include non projector options that don't cast light but still "light" up.  (With the introduction of PBR, projection lights are becoming less optional and more always on- but they are overpowering when projectors are not enabled if you spell out much, it's a lot of lights!)  Light is also editable on all- set inside tint (note: PBR and non PBR tint in different places, and that will not be carried over!) and glowing emissive color tint, flame tint, glow amounts, and light amounts (intensity, falloff, etc.) while it's lit, and it will be remembered (note: only some of these options will be remembered if you change a pumpkin with the HUD after setting anything, with the way it overwrites some things, so make your color selection first!  That was always the case before, but there are some other weirdnesses with the way it overwrites things with the way PBR works, more things are attached to the material instead of the object) when you turn it off and on again.

PBR and non PBR texture options, pick your preference with the HUD, fallback textures will change to match PBR choices for those not on PBR viewers.  As most (but not all!  Depends on what the thing is) of the time, PBR Metal and Roughness settings are also editable to some degree- you can make them a bit shinier (or less shiny) if that's your preference- I try to do as much adjustable in SL as I can, so it's as flexible as I can come up with so you don't have to like what I like!

You can also touch and hold for 5 seconds and set the access to only yourself as the owner, members of the active group the pumpkin is rezzed under, or everyone for who can turn them on and off on touch.

At Collabor88, October 8 - November 6.

Fez Head Stand

While it's too hot to be Fall out there, it's getting towards the concept of Fall, so I'm nesting.  Some decor for your Industro space at Collabor88, a head shaped hat stand for your fez.  I have a few fezzes (acquired the old fashioned way, I inherited them from a Shriner) that I keep on heads, these are plain, without the branding of an organization or sect, but they can be all sorts of colours of your choice, fez and tassel.  The head has 2 wood options, gold, silver, cracked white ceramic, and black (all with PBR and non options) to choose from to show off that fez.

At Collabor88, September 8 - October 6.

Schadenfreude Mulholland Accent Tables

A little piece of old style Hollywood glam for your library or living room at this Noir Nights Collabor88 birthday round.  The Mulholland Accent Tables have a star design wood inlay top in two tiers, in two toned stained natural wood or black stained and white bleached wood, in a metal frame with 5 metal options to choose from.  PBR optional, PBR versions will also display the non PBR version to those without a PBR viewer.  1 Land Impact each table.

At Collabor88, August 8 - September 6.

Schadenfreude Hamster Figurines

Hamster Festival is here for 2024!  A festival devoted to Beetlebones Dwarf Hamster avatars, but the hamster is optional and it's full of general fun things!  Hamster parties sometimes happen, and they are very welcoming to avatars of all heights and species!  I love Hamfest, and I look forward to it every year, a celebration of the fun possible in SL.

This year I'm giving away these little ceramic figurines.  They are inspired by the fox figurines (as well as some other types, but foxes are the most common) at Shrines, but this time, they are hamsters.  Hamstar Shrine, which was signing Goshuin during the New Year Goshuin Project event had little tiny stone hamsters out at their hokora, reminding me that ceramic ones might be desirable as well!  Clean and dirty, PBR and non PBR textures (you might even want to mix the two types of textures for things that look just a little different if you want to put a number of them out), they will fallback to non PBR textures on non PBR viewers if set to use PBR textures.  1 LI each, with or without a base or pedestal, pairs in one object on pedestals also included.

This year, Hamster Festival is open July 28 at 5am SLT to August 17 at 8am SLT.  (It operates on Japan time.)

There is also a Summer Goshuin Event running August 1 - 14, go around SL visiting Shrines and Temples, collecting the stamps!  The Hamster Festival Shrine is not an official stop (it is not on the list, but there are a few places around that aren't on the list that are offering this currently), but you can get your book stamped at it too!

Schadenfreude Mirrors: Sun, Moon, and Stars

PBR is extra-official on the grid now, with Firestorm having released a PBR viewer.  My feelings on PBR are...complicated.  Sometimes I love it.  Sometimes I hate it.  On the exact same thing.  Textures are more dynamic now so everything is WAY more complicated.  I'm still going to be doing non PBR versions most of the time too, as those at least you might have some idea of what they will look like?  And often I like that better, sooooo.  But anyway.  One thing they do that is fancy and new is MIRRORS.  That reflect like...actual stuff, and even sometimes people.  Mirrors are complicated and you will have to do some things to make them work right BUT you can now!  And from my Wandering Soul at this round of Collabor88, a trio of mirrors.  Two are pretty much always mirrors (unless you remove it and put pictures in, which you can!), a third that has a mirror option and a metal option.

The Mirror of the Moon includes the crescent moon facing either direction.

And the Starburst Wall Art can be metal stars, or mirrored stars, and includes individual stars and rows of stars as well as the entire starburst piece, so you can arrange it as you desire.  All include the same 7 metals (silver, gold, rose gold, bronze, copper, a blackened with silver edges, and rusted cast iron) with PBR and Blinn-Phong (the textures we were using) options- non PBR viewers will see the Blinn-Phong version but you can also pick it in PBR viewers if you prefer it (as I often do); and include versions that have mirror probes already attached to make setup easier, but you can also add your own probes (and adjust the ones included as well).

You must enable your viewer to see mirrors!  There is also Dynamic Reflections, which are almost but not quite mirrors, which you may want to set probes to instead (choose the mode for the probe in the Features tab in Build), depending on how your computer handles mirrors- they aren't quite as rough on your system as true mirrors are, but they don't update the reflections as smoothly.

To enable Mirrors:

Go to Avatar>Preferences in the top menu.
Go to Graphics tab
If it exists, open Advanced Settings (some viewers have the settings without having to go into that, but you need to get to the below settings or similar)
Enable the checkbox for Mirrors
Set Reflection Detail to Static & Dynamic or Realtime
Set Reflection Coverage to Full scene
Set Mirror Resolution and Mirror Update Rate to your choice, for quality and performance

For the versions w/ probe, that's all you need to do- but you can also set up your own probes!  Second Life is now intended for YOU to set up your own (non mirror) probes everywhere on your land for PBR textures to look right.  Not my rules, their rules: they set up a kind of bad default and then want you to set up spaces with probes yourself to fix it.

To add a probe: open up the Build menu (Build > Build in the top menu)
Create a box
In Features tab, enable checkbox for Reflection Probe.  You will not be able to reselect this box now unless you enable the ability to Select Reflection Probe Volumes in Build>Options!  If you don't let it go, you're good, but once you do it disappears and is hard to select!
Scale the box up to fix your space, anything inside the box will show more realistic reflections.
Choose Box or Sphere for shape- Box is better for indoors, you can scale it to fit your room.  Spheres will be the same size on every side even if you try to scale them otherwise.  If you're making a probe for mirrors, Spheres aren't even an option, it's only Boxes!
Choose how much the Probe updates within it.  This is where you enable Mirrors!  Static won't show avatars, but also won't be as much of a performance hit.

The location of the center of the box DOES matter when it comes to how things reflect (especially of note with mirrors!), so you may want to move your box around.  It is not recommended to overlap too many boxes, the idea is no overlapping if possible.  It is not recommended to have more than one probe with Mirrors enabled in an area.

Once you let go of your probe, you can find it again with Build > Options > Highlight Transparent, it will take on a transparent red color.  To select it, grab a box selection box around it and deselect everything else (a total pain) or Build > Options > Select Reflection Probe.  By default it will try not to get in the way, and be Phantom BUT if you link it to other prims it will NOT be Phantom anymore, set the entire object to Phantom or set the linked Probe object in the Build popup in Features tab to Physics Shape Type: None.  Not this only works if the Probe is NOT the root prim, but you can select it easier by selecting the object it is linked to, then enabling Edit linked in the Build popup, then navigating through each object in the link set with Build > Select Elements>Select Next Part or Face (if you use this a lot, you'll want to learn that hotkey!)

There is also a basic mirror Material included that will let you turn faces of anything you want into a mirror.  It's easy to make your own too- create a new Material in your inventory, set the Base Color and the Metal-Roughness to Blank white textures, set Metal to 1.0 and Rough to 0.0, and use that to texture your mirror.  You can also make an old school mirror that will also reflect now! by setting the Environment in your Specular to 255.  It'll look a touch different than the PBR mirror (it's a little more silvery) but it also works, as long as you also put out the probe for it!

p.s. If you are a vampire with vampire guests, you can set your mirrors to not reflect people, but to reflect everything else!  Check out Static Reflections Probes.

Mirrors at Collabor88, July 8 - August 6.

Schadenfreude Tatsu Dragons

Slinky longboi dragons at Japonica!  7 poses of dragons, each with mirrored versions, and each with lower and higher LI options.  At given size, the lower LI versions are 1-2 LI each with more aggressive LODs, and the higher LI versions are 4-9 LI each (the more they have stretched out, the higher the LI due to the size penalty in calculating LI).  Due to the nature of mesh, making your dragons larger will cost more LI.

Textures include PBR and non PBR versions, choose whether you want PBR or not in the HUD before you make your color selection.  Non PBR textures will still change with PBR, non PBR viewers will see your color selection regardless.

I've put preview images on each of the posed dragons in inventory- don't expect that all the time.  The process for doing it is SO CLUNKY, just getting the actual pictures attached to the object.  It might not be the worst for doing one, but it is amazingly tedious for 28, and I regretted my life choices repeatedly during the process.  So while I'd like to do it because it's a neat feature (though truth be told, I'm on the fence about it, the images keep popping up when I actually don't want them to and am just trying to get. to. a. thing.), I may not unless it gets way easier to do.  It shouldn't take a considerable amount of time and effort and menu after menu for each just to do that, it should be simple drag and drop!

At Japonica, open June 30 at 8am SLT - July 21 at 8am SLT.

Schadenfreude Mini Disco Party

A summer disco at Summerfest!  With a mini rotating disco ball to hang from your ceiling, a small mirror ball to place around, and a drink in a mirrored ball cup.

X hair: [monso] Nova Hair (morphine.janick)
tops: *katat0nik* DJ Miko (katat0nik.pidgeon)
tattoos: ~silentsparrow~ Fierce Flora Tattoos (hyasynth.tiramisu)
eyes: {S0NG} :: Cindi~ Purple Eye (funeral.plutonian)
skin: ives. Noelle Skin (EvoX) - VE ROSE KISS (evan.nova) with Velour Rosekiss body (kiria.mama)
head: [AKERUKA ADVX] Emma Head (koaz.koba)

credits

PBR mirrors for maximum reflection, and projector lights to scatter the light around.  Texture change drink, straw, and umbrella in the drink, and the mirrors can be silvery, pink, or blue- or you can use Edit to change them to your choice instead.

At Summerfest, June 22 - July 12.

Schadenfreude Prince of Roses Top Hat

X hair: NOVA. Aloha (nova.faerye)

credits

A top hat with roses awaits you at Shop&Hop!  Texture change with some options for hat and roses.

At Shop and Hop, June 21 - July 21.

Schadenfreude Pineapple and Glasses

X hair: tram N0608 hair (moca.loup)
flowers: *katat0nik* Tropical Necklace (katat0nik.pidgeon)
top: *katat0nik* Tropical Halter Top (katat0nik.pidgeon)
jacket: *katat0nik* Summer Hoodie (katat0nik.pidgeon)
pants: Blueberry - Authentic - Ripped Jeans (blueberryxx)
tattoos: ~silentsparrow~ Fierce Flora Tattoos (hyasynth.tiramisu)
eyes: {S0NG} :: Cindi~ Purple Eye (funeral.plutonian)
skin: ives. Noelle Skin (EvoX) - VE ROSE KISS (evan.nova) with Velour Rosekiss body (kiria.mama)
head: [AKERUKA ADVX] Emma Head (koaz.koba)
pose: SEmotion Modelling 33 (marie.sims)
taken at Isle Du Noir

credits

Glasses for you and your pineapple, to share the Tropical Bliss at Collabor88!

Four styles of glasses, sunglasses and clear, with 23 plastic frame options (tortoiseshell and 22 solid colours, including 2 semi holographic).  The Dexter glasses have a HUD that will also change your pineapple's glasses to match any of the options.

X Dexter:
hair: tram N0208 hair (moca.loup)
top: Orphic Layered Shirts (grimwar)
tattoos: Schadenfreude Lennox Rose Tattoos (allegory.malaprop)
piercing: Schadenfreude Diamond Dermal Piercing (allegory.malaprop)
eyes: {S0NG} Yuki~ Morado Eyes (funeral.plutonian)
skin: -tres blah- {Light} Blessa (julliette.westerburg) retired
head: GENUS Project - Strong Face GIFT001 (genusproject)

Betty:
hair: tram N0608 hair (moca.loup)
flowers: *katat0nik* Tropical Necklace (katat0nik.pidgeon)
top: *katat0nik* Tropical Halter Top (katat0nik.pidgeon)
tattoos: ~silentsparrow~ Fierce Flora Tattoos (hyasynth.tiramisu)
eyes: {S0NG} :: Cindi~ Purple Eye (funeral.plutonian)
skin: ives. Noelle Skin (EvoX) - VE ROSE KISS (evan.nova) with Velour Rosekiss body (kiria.mama)
head: [AKERUKA ADVX] Emma Head (koaz.koba)

Feline:
hair: *barberyumyum* P28 +bangs (toraji.voom)
tattoos: Schadenfreude Pink Kiku Sleeves Tattoo (allegory.malaprop)
eyes: {S0NG} :: Snow Eyes - Dark Brown (funeral.plutonian)
eyebrows: ONEDAYs - Wang Ning Eyebrows (attoocha)
skin: more more. luna skin_milk tone (jelly.pancake)
head: LeLUTKA LILLY (jaden.nova)

Hayworth:
hair: NOVA. Aloha (nova.faerye)
outfit: [Cosmic Dust] - Luxe Bikini (cosmic.cat)
lips: TOP1SALON - HD XMAS GIFT LIPSTICK (fraumuller)
eyes: {S0NG} :: Star~ Black Eye (funeral.plutonian)
skin: IVES - LeLU EvoX - Eden Skin (evan.nova), with MUDSKIN add-on (sopha.portal)
head: LeLUTKA LILLY (jaden.nova)

credits

At Collabor88, June 8 - July 6.

Schadenfreude Cake Day Sugar Shock Shake

Go into sugar shock with a milkshake topped with an entire slice of cake at this Sweet and Toxic Collabor88!  7 different cake and milkshake flavors to choose from, plus options for the swirl lollypops, straws, and cherries to meet your tastes.  2 confgurations to display it at 1 LI each, or hold the glass mug in your left or right hand.

At Collabor88, May 8 - June 6.

Schadenfreude Crystal Halo

X dress: :::classical*Cute*clothing:::bloomingDress (kamo)
hair: [monso] Ren Hair (morphine.janick)
tattoos: ~silentsparrow~ tenebrae tendrils tattoos (hyasynth.tiramisu)
skin: IVES- Eden Skin - (eden.nova), VELOUR: Ipanema (kiria.mama), MUDSKIN_DARKER TONE ADD-ON (sopha.portal)
eyes: {S0NG} :: Star~ Black Eyes (funeral.plutonian)
head: / HEAD / lel EvoX LILLY (jaden.nova)

credits

Celebrate your connection to the Etheral Earth at Collabor88 with a halo headband with crystals.  Texture change with 7 metal options and crystal textures in 2 styles, set all the crystals to match or mix them up a bit with the HUD.

At Collabor88, April 8 - May 6.

Schadenfreude Hanami Burger and Sake

Sakura Matsuri is open at Okinawa, take the time out to relax and enjoy the pink explosion of spring of the sakura trees.  While in SL, it can last for as long as we please, it's still a short time before it's over- appreciate the passage of time and the wonders it brings.

The Hanami Burger is a burger full of sakura blooms that have exploded to take the place of the meat: 4 shades of pink flowers atop 6 colors of sauce, all wrapped up in 4 colors of bun.  On or off a plate in plain white or pink with a white flower in the center, you can carry around the plated burger or the burger alone or rez them.  A rezzed version of the plated burger will also give burgers to your visitors to hold.  1 LI each piece to rez.

The Yumeharu Sake Set dreams of spring sakura blooms, with a miniature tree growing inside the bottle.  Wood masu cups to hold or display, with floating sakura flowers join the bottle, and a version of the bottle is included that will give masu cups full of sake to your visitors.  1 LI each piece to rez.

Find them both while the cherry blossoms bloom at the Okinawa Sakura Matsuri, March 14 @7am SLT to March 31!

Currently I am not in a climate that the sakura tree thrives in, so my hanami this year instead will be practiced admiring the short blooming window of members of the Bauhinia genus, orchid trees.

Schadenfreude Forest Milk

X hair: tram N0308 (moca.loup)
bra: *katat0nik* Flower Bra Top (katat0nik.pidgeon)
skirt: Stories&Co. Midnight Stories - Skirt01 (flutter.memel)
eyeshadow: Cheap Makeup - Aurelia Spring Blossom (stella.semaphore)
rings: Schadenfreude Geo Ring Set 1 (allegory.malaprop)
eyes: {S0NG} :: Snow Eyes - Dark Brown (funeral.plutonian)
eyebrows: ONEDAYs - Wang Ning Eyebrows (attoocha)
tattoos: Schadenfreude Pink Kiku Sleeves Tattoo (allegory.malaprop)
skin: more more. luna skin_milk tone (jelly.pancake)
head: LeLUTKA LILLY (jaden.nova)

credits

Spring Time Extravagance at Collabor88 brings little milk cartons, with 5 different choices of plants.  Text in English and Japanese, each flavor has 3-4 choices in shade/color; plants each have a few texture options to choose from too.  Hold in left or right hand, or rez at 1 LI each.

At Collabor88, March 8 - April 6.

Schadenfreude Cupid's Heart with Roses

Cupid is Dead at Collabor88, but I saved his heart just for you.  A heart vase with roses in whites, pinks, reds, and blacks- 23 solid and mixed options.  Change each rose individually or set them all to the same, the vase has  metal options (2 shades of gold, 2 shades of silver, rose gold, and copper) and plastic options (white, black, pale red, and a pastel rainbow with 2 shades of pink).  The heart vase has PBR options of each texture, the HUD allows you to choose between PBR and Specular for each.  (I'm not entirely sold on PBR.  Sometimes it looks great.  Often it looks awful.  Same exact material, depending on where you have it.  So...you get to choose if it looks good in your space or not.)  1 LI each vase full of roses.

At Collabor88, February 8 - March 6.

Schadenfreude Love/Hate Hearts Pancake Top Hat

X lingerie: Schadenfreude Cupcake Gluttony Lingerie (allegory.malaprop)
hair: [^.^Ayashi^.^] Fuyuko hair (ikira.frimon)
tattoos: ~silentsparrow~ Flower Burst tattoo (hyasynth.tiramisu)
eyeshadow: [PF] Morgana/Mori- Eyeshadow (mochi.milena)
lips: [PF] Elsie Lipgloss (mochi.milena)
eyes: {S0NG} :: Saki~ Lilac Eyes (funeral.plutonian)
skin: [PF] Sora - Sugoi with [PF] Morgana/Mori - Monolid (mochi.milena)
ears: .random.Matter. - Thailin Ears - Human (nikohl.hax)
head: [AKERUKA] Head V2.7 #Staysafe Limited Edition (koaz.koba)

credits

A very Valentine Shop and Hop, with the gift of a fancy top hat for all.  Texture change brim and binding with some pastel options to choose from.

X human:
hair: [monso] My Hair - Gabriella (morphine.janick)
shirt: ANE Vintage Blouse (anemysk.karu)
shorts: Schadenfreude Moody Bloomers (allegory.malaprop)
eyepatch: Schadenfreude Rose Mori Eyepatch (allegory.malaprop)
tattoos: ~silentsparrow~ Magic Forest Tattoos (hyasynth.tiramisu)
cheeks: #adored - blushing hearts (ampersand.artful)
eyeshadow: Izzie's - LOGO - Bunny Eyeshadow pink (izzie.button)
ears: .random.Matter. - Iseul Ears (nikohl.hax)
eye: {S0NG} :: Tzuyu~ Violet Eye (funeral.plutonian)
skin: Clavis. BOM Skin Strawberry Tone 009 Brow 3 (profondum)
head: *6DOO* Human mesh head HUCI-01 (ondo.mode)

CHIBIT:
hair: KMH Hair 113 (kumibou.mayo)
outfit: *Frangipani Garden* CHIBIT Rose Princess (frangipani.flow)
avatar: *GUARAN-DOU* CHIBIT (asma.harcourt)

credits

Plus a re-release of the Love Choco Bows, now as an uberpack of all three styles of bow with assorted texture options to play with.

At Shop and Hop, February 1 - 19.

Schadenfreude Latte Runneth Over

A Snow Bunny at Collabor88...well, a latte bunny.  And a latte cat, a latte dragon, a latte bear, a latte sparrow, and a latte octopus.  Warm up with some cute lattes when you come in from the snow.  Texture change with 5 flavors of latte and 15 dish colors to choose from, rez them at 1 LI each, or carry them around with you.

At Collabor88, January 8 - February 6.

Happy New Year!

I love visiting shrines in SL, my Hatsumode, first shrine visit of the year, is always to Katakana Shrine.  After lurking around for a few years, they invited me to join in, so now I also offer some of the free gifts for visitors- until mid January there are free gifts and lucky boards at the shrine, for the festival to celebrate the new year!

X kimono: !HONENOKE! KIMONO (f) Tako (RLFandNAMINOKE, chiki.vita & taiko.mccaw)

credits

Lucky Okobo Geta, with dragons and the lucky mallet, with 4 strap colors,

and dragon daruma dolls in 2 colors.  There is also a dragon kokeshi doll, using the HBS kokeshi base, which is also a gift there, with templates to make your own!

This year, there is a Goshuin Project run by sakka Flow, where you can get the special red stamps to commemorate your shrine visits.  It has introduced me to some beautiful new places!  You can get a stamp and a bonus set of books as well as the original set, at Katakana Shrine.